Specifications
This kind of gearbox is a new transmission machine designed & manufactured by helical-bevel gear transmission principle.
1. High mechanical efficiency: 94%-98% (depends on the transmission steps);
2. Input form: flange input, direct motor input, shaft input;
3. Materials of gearbox body: HT250 high-strength cast iron;
4. Materials of shafts:42CrMo alloy steel;
5. Materials of gears : 20CrMnTi alloy steel;
6. Heat treatment: tempering, cementiting, quenching;
7. Surface hardness of gears: HRC58°-62 °;
8. Maching precision of gears: 6-5GRADE;
9. Brand of bearings: HRB, LYC,ZWZ,NSK;
10. Noise of gearbox: 60-68dB;
11. Gear lubrication oil: Mineral oil or Synthetic oil.
| Fast selection: | | | | | | | | | |
| | | | | | | | | | | |
| | Model | Shaft Dia.(mm) | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Weight | |
| | Solid | Hollow(H7) | (mm) | (mm) | (kw) | (Nm) | (KGS) | |
| | KC37 | 25k6 | 30 | 100h13 | 160 | 0.12~2.2 | 8~102 | 180 | 13 | |
| | KC47 | 35k6 | 35 | 112h13 | 200 | 0.18~4 | 8~126 | 380 | 22 | |
| | KC57 | 35k6 | 40 | 132h13 | 250 | 0.25~5.5 | 8~143 | 580 | 29 | |
| | KC67 | 40k6 | 40 | 140h13 | 250 | 0.37~7.5 | 8~143 | 680 | 33 | |
| | KC77 | 50k6 | 50 | 180h13 | 300 | 0.75~11 | 8~175 | 1300 | 45 | |
| | KC87 | 60m6 | 60 | 212h13 | 350 | 1.5~18.5 | 8~197 | 2500 | 81 | |
| | KC97 | 70m6 | 70 | 265h13 | 450 | 2.2~30 | 8~197 | 3900 | 150 | |
| | KC107 | 90m6 | 90 | 315h13 | 450 | 4~45 | 8~197 | 6800 | 230 | |
| | KC127 | 100m6 | 100 | 375h13 | 550 | 7.5~90 | 8~197 | 11200 | 420 | |
| | KC157 | 120m6 | 120 | 450h13 | 660 | 11~110 | 8~198 | 11700 | 680 | |
| | KC167 | 160m6 | 135 | 500h13 | -- | 15~160 | 18~186 | 32000 | 1050 | |
| | KC187 | 190m6 | 155 | 600h13 | -- | 18.5~200 | 18~186 | 50000 | 1650 | |
| | Remark: the weight without oil and motor, shaft and flange input add 10%. | |
